Search
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 16 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 16 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
NEST Classic Tiltable
| V Hz W lm lm/W K oC CRI mm |
220 - 240 50 8 730 - 839 91 - 104 3000 / 4000 +10 to +35 Ra >80 Ø85 |
Chromaticity tolerance (initial MacAdam):3 Non-dim; DALI Distribution angle 15°/24°/36°/60° Body maerial: Aluminium Cover type: Clear glass Warranty 3 - 5 years 50 000 h (L90B50) at Ta = 25 °C 100 000 h (L80B50) at Ta = 25 °C |
 .png) RoHS IP40 |
Technical parameters for final product can differ from typical data by 10% due to special conditions of LED manufacturing processes.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
LEAF Slim
| V Hz W lm lm/W K °C CRI PF |
220 - 240 50 - 60 15 - 45 Up to 4800 Up to 125 3000 / 4000 +10 to +40 >80 >0.85 |
Chromaticity tolerance (initial MacAdam): 3 DALI / Non dimmable Mounting: Recessed / Surface / Pendant Body material: Aluminium Cover type: Microprismatic / Opal Dimensions 595x595x12,5 mm Warranty 5 years 50 000 h (L90B50) at Ta = 25 °C 100 000 h (L80B50) at Ta = 25 °C |
 DALI NDRoHS IP20/IP44 |
Technical parameters for final product can differ from typical data by 7% due to special conditions of LED manufacturing processes.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
STONE
| V Hz W lm lm/W K oC CRI |
220 - 240 50 - 60 10 - 50 1300 - 6850 122 - 139 3000 / 4000 -15/-25 to +35 >80 |
Chromaticity tolerance (initial MacAdam): 3
DALI Length 679/1289/1589 mm Body material: Polycarbonate Cover type: Prismatic Warranty 3 - 5 years (depending on configuration) 50 000 h (L90B50) at Ta = 25 °C 100 000 h (L80B50) at Ta = 25 °C
Ambient temperature -15 ... +35oC - non dimmable -25 ... +35oC - dimmable
-40 ... +35oC - freezers
0 ... +35oC - emergency
|
RoHS IP65 IP67 IK08 |
Technical parameters for final product can differ from typical data by 7% due to special conditions of LED manufacturing processes.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
BIRCH
| V Hz W lm lm/W K oC CRI |
220 - 240 50 - 60 12 - 82 Up to 8850 Up to 110 3000 / 4000 +10 to +35 Ra >80 |
Chromaticity tolerance (initial MacAdam):3 DALI Cover: Prismatic Mounting: Surface / Pendant Body material: Steel sheet Size: 600/900/1200/1500/1800x144x35 50 000 h (L90B50) at Ta = 25 °C 100 000 h (L80B50) at Ta = 25 °C Warranty 5 years |
IP20 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
MINI MARTIN
| V Hz W lm lm/W K oC CRI mm Ø |
220 - 240 50 - 60 10 - 110 1100 - 13550 110 - 136 3000 / 4000 / 5000 -40 to +50 >70 / >80 (1 520 x 220 x 109 40 - 60 |
Chromaticity tolerance (initial MacAdam):5 1-10V; DALI; Midnight dimming Surge protection: 6kV (L-N) and 10 kV (L/N -PE without DALI connection)(2 Radio frequency Warranty 5 years 100 000 h (L95B10C10) at Ta = 25 °C |
.png) .png) RoHS IP66 IK08(3 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
STORK
| V Hz W lm lm/W K oC CRI mm Ø |
220 - 240 50 - 60 18 - 280 2300 - 34660 124 - 142 3000 / 4000 / 5000 -40 to +50 (1 >70 / >80 (2 801 x 370 x 104 40 - 60 |
Chromaticity tolerance (initial MacAdam):5 1-10V; DALI; Midnight dimming Surge protection: 6kV (L-N) and 10 kV (L/N -PE without DALI connection)(3 Radio frequency / Power line Warranty 5 years 100 000 h (L95B10C10) at Ta = 25 °C 100 000 h (L90B10C10) at 200 - 280 W |
RoHS IP66 IK09 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
DOVE
| V Hz W lm lm/W K oC CRI PF |
220 - 240 50 - 60 8 - 21 615 - 2105 88 - 105 3000 / 4000 +10 to +45 >80 >0.74 |
Chromaticity tolerance (initial MacAdam):3 DALI / Non dimmable Body material: Aluminium Cover type: Opal Leght 320/405/600/685/880/965/1160/1245 Warranty 3 or 5 years 50 000 h (L90B50) at Ta = 25 °C 100 000 h (L80B50) at Ta = 25 °C |
RoHS IP40 / IP44 IK08 |
Technical parameters for final product can differ from typical data by 7% due to special conditions of LED manufacturing processes
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
ICICLE Single
| V Hz W lm lm/W K oC CRI PF |
24 - 5 - 40 400 - 3200 82 (without driver) 3000 / 4000 -25 to +35 Ra>80 >0.9 |
Chromaticity tolerance (initial MacAdam):3 Non dimmable / DALI Body:Aluminium Cover type: Matt Length 255/505/755/1005/1255/1505/1755/2005 Warranty 3 years 50 000 h (L90B50) at Ta = 25 °C 100 000 h (L80B50) at Ta = 25 °C |
.jpg) RoHS IP20 |
Technical parameters for final product can differ from typical data by 10% due to special conditions of LED manufacturing processes.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
NEST Surface/Pendant
| V Hz W lm lm/W K oC CRI mm |
220 - 240 50 15 - 25 1540 - 2685 90 - 113 3000 / 4000 +10 to +35 Ra >80 Ø140/160/180/200 |
Chromaticity tolerance (initial MacAdam):3 Non-dim / DALI Body maerial: Aluminium Cover type: Clear glass Warranty 3 - 5 years 50 000 h (L90B50) at Ta = 25 °C 100 000 h (L80B50) at Ta = 25 °C |
RoHS IP20 / IP40 |
Technical parameters for final product can differ from typical data by 10% due to special conditions of LED manufacturing processes.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
NEST Classic Round
| V Hz W lm lm/W K oC CRI mm |
220 - 240 50 6 - 40 1060 - 4360 70 - 113 3000 / 4000 +10 to +40 >80 Ø180 / 225 |
Chromaticity tolerance (initial MacAdam):3 Non-dim; DALI / 1-10V Body material: Aluminium Cover type: No cover / Clear glass / Matt glass Warranty 3 - 5 years 50 000 h (L90B50) at Ta = 25 °C 100 000 h (L80B50) at Ta = 25 °C |
RoHS IP20 / IP40 / IP54 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
SHELL Basic
| V Hz W lm lm/W K oC CRI mm |
220 - 240 50 7 - 28 745 - 2860 102 - 110 3000 / 4000 +10 to +40 Ra >80 Ø 320x75 |
Chromaticity tolerance (initial MacAdam): 3 DALI / Non dimmable Body: Steel Cover type: Opal Warranty 3 - 5 years 50 000 h (L90B50) at Ta = 25 °C 100 000 h (L80B50) at Ta = 25 °C |
.jpg) RoHS IP44 IK09 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
ORRIS
| V Hz W lm lm/W K oC CRI mm Ø |
220 - 240 50 - 60 15 - 50 1100 - 4250 72 - 88 3000 / 4000 / 5000 -40 to +40 Ra>70 / Ra>80(1 425x425x816 40 - 60 |
Chromaticity tolerance (initial MacAdam):5 1-10V; DALI; Midnight dimming Surge protection: 6kV (L-N) and 10 kV (L/N -PE without DALI connection)(2 Radio frequency / Power line Warranty 5 years >70 000 h (L90B10) at Ta = 25 °C(3 |
KEMA KEUR RoHS IP54(4 IK08 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
NEST Classic Square
| V Hz W lm lm/W K oC CRI mm |
220 - 240 50 22 - 48 1631 - 3693 70 - 79 3000 / 4000 +10 to +45 >80 / Ra>90 300x300 |
Chromaticity tolerance (initial MacAdam):3 Non-dim / DALI / 1-10V Body material: Steel Cover type: Prismatic Warranty 5 years 50 000 h (L90B50) at Ta = 25 °C 100 000 h (L80B50) at Ta = 25 °C |
RoHS IP40 |
Technical parameters for final product can differ from typical data by 10% due to special conditions of LED manufacturing processes.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
STORK LITTLE BROTHER
| V Hz W lm lm/W K oC CRI mm Ø |
220 - 240 50 - 60 18 - 170 2300 - 21300 121 - 137 3000 / 4000 / 5000 -40 to +50 >70 / >80 (1 665 x 280 x 104 40 - 60 |
Chromaticity tolerance (initial MacAdam):5 1-10V; DALI; Midnight dimming Surge protection: 6kV (L-N) and 10 kV (L/N -PE without DALI connection)(2 Radio frequency / Power line Warranty 5 years 100 000 h (L95B10C10) at Ta = 25 °C |
RoHS IP66 IK09 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
STORK Flood
| V Hz W lm lm/W K oC CRI mm Ø |
220 - 240 50 - 60 18 - 280 2300 - 34660 124 - 142 3000 / 4000 / 5000 -40 to +50 (1 >70 / >80 (2 801 x 370 x 104 40 - 60 |
Chromaticity tolerance (initial MacAdam):5 1-10V; DALI; Midnight dimming Surge protection: 6kV (L-N) and 10 kV (L/N -PE without DALI connection)(3 Radio frequency / Power line Warranty 5 years 100 000 h (L95B10C10) at Ta = 25 °C 100 000 h (L90B10C10) at 200 - 280 W |
RoHS IP66 IK09 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
OWL
| V Hz W lm lm/W K °C CRI mm |
220 - 240 50 - 60 85 - 380(1 85 - 340(2 11700 - 46200(1 11700 - 42700(2 122 - 139 3000 / 4000 / 5000 -40 to +50(3 >70 / >80 (4 533 x 655 x 85 |
Chromaticity tolerance (initial MacAdam):5 1-10V; DALI; Midnight dimming Surge protection: 3; 6; 10 kV (optional)(5 10 kV (L/N -PE without DALI connection)(6 Radio frequency / Power line Warranty 5 years 100 000 h (L95B10) at Ta = 25 °C 100 000 h (L90B10) at Ta = 25 °C (ECO) |
RoHS IP66 IK08 |
(1 Class I
(2 Class II
(3 340 - 380 W Ta = -40...+45ºC
(4 Luminaries with color rendering index (CRI): Ra >90 on request
(5 VIZULO reserves the right to use as standard 6 or 10kV surge protection device
(6 This value is only informative and may change according to selected article
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
ICICLE Connect
| V Hz W lm lm/W K oC CRI PF |
24 - 5 - 40 400 - 3200 82 (without driver) 3000 / 4000 -25 to +35 Ra>80 >0.9 |
Chromaticity tolerance (initial MacAdam):3 Non dimmable / DALI Body:Aluminium Cover type: Matt Length 255/505/755/1005/1255/1505/1755/2005 Warranty 3 years 50 000 h (L90B50) at Ta = 25 °C 100 000 h (L80B50) at Ta = 25 °C |
RoHS IP20 |
Technical parameters for final product can differ from typical data by 10% due to special conditions of LED manufacturing processes.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
BELL
| V Hz W lm lm/W K oC CRI mm Ø |
220 - 240 50 - 60 15 - 82 1375 - 10780 120 - 138 3000 / 4000 -40 to +40 >70 / >80 (1 Ø 560x450 40 - 60 |
Chromaticity tolerance (initial MacAdam):5 1-10V; DALI; Midnight dimming Surge protection: 6kV (L-N) and 10 kV (L/N -PE without DALI connection)(2 Radio frequency / Power line Warranty 5 years >70 000 h (L90B10) at Ta = 25 °C(3 |
KEMA KEUR RoHS IP54(4 IP55 IK08 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
CROCUS
| V Hz W lm lm/W K oC CRI mm Ø |
220 - 240 50 - 60 15 - 100 1275 - 11280 108 - 122 3000 / 4000 -40 to +40 >70 / >80 (1 Ø 610x595 40 - 76 |
Chromaticity tolerance (initial MacAdam):5 1-10V; DALI; Midnight dimming Surge protection: 6kV (L-N) and 10 kV (L/N -PE without DALI connection)(2 Radio frequency / Power line Warranty 5 years >70 000 h (L90B10) at Ta = 25 °C(3 |
KEMA KEUR RoHS IP54 (4 IK08 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
ACORN Deco
| V Hz W lm lm/W K oC CRI Ø |
220 - 240 50 - 60 18 - 75 1970 - 9440 120 - 135 3000 / 4000 (1 -40 to +40 >70 / >80 (2 60 - 76 |
Chromaticity tolerance (initial MacAdam):5 1-10V; DALI; Midnight dimming Surge protection: 6kV (L-N) and 10 kV (L/N -PE without DALI connection)(3 Radio frequency (4 Warranty 5 years 100 000 h (L90B10) at Ta = 25 °C(5 |
RoHS IP66 IK08 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
PINE Single
| V Hz W lm lm/W K oC CRI PF |
220 - 240 50 - 60 14 - 80 Up to 8100 Up to 116 3000 / 4000 +10 to +35 Ra>80/ Ra>90 >0.85 |
Chromaticity tolerance (initial MacAdam):3 DALI / Non dimmable / Pull dimmer / Bluetooth Body: Aluminium Cover type: Prismatic / Opal Mounting: Surface / Pendant Size: 580/860/1140/1420/1700/2260 x 77 x 93 Warranty 5 years 50 000 h (L90B50) at Ta = 25 °C 100 000 h (L80B50) at Ta = 25 °C |
RoHS IP40 |
Technical parameters for final product can differ from typical data by 7% due to special conditions of LED manufacturing processes.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
ACORN
| V Hz W lm lm/W K oC CRI mm |
220 - 240 50 - 60 50 - 250 5450 - 22500 Up to 109 3000 / 4000 / 5000 -30 to +50 Ra >70 / Ra >80 Ø 350 / 450 |
Chromaticity tolerance (initial MacAdam):5 1-10V / DALI Cover type: Clear glass Radio frequency / Power line (1 Warranty 5 years 75 000 h (L80B10) at Ta = 25 °C |
RoHS IP65 IK08 |
(1 On request
Technical parameters for final product can differ from typical data by 10% due to special conditions of LED manufacturing processes.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
LATANA
| V Hz W lm lm/W K oC CRI Ø |
220 - 240 50 - 60 15 - 70 1820 - 8600 121 - 131 3000 / 4000 -40 to +40 >70 / >80 (1 38 - 60 |
Chromaticity tolerance (initial MacAdam):5 1-10V; DALI; Midnight dimming Surge protection: 6kV (L-N) and 10 kV (L/N -PE without DALI connection)(2 Radio frequency Warranty 5 years >70 000 h (L90B10) at Ta = 25 °C(3 |
RoHS IP54 IK08 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
ALLIUM
| V Hz W lm lm/W K oC CRI Ø |
220 - 240 50 - 60 15 - 70 1540 - 7780 (1 101 - 118 (1 3000 / 4000 -40 to +40 >70 / >80 (2 60 - 76 |
Chromaticity tolerance (initial MacAdam): 5 1-10V; DALI; Midnight dimming Surge protection: 6kV (L-N) and 10 kV (L/N -PE without DALI connection) (3 Radio frequency / Power line Warranty 5 years >70 000 h (L90B10) at Ta = 25 °C (4 |
RoHS IP54 IK08 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
LILLY
| V Hz W lm lm/W K oC CRI mm Ø |
220 - 240 50 - 60 18 - 100 1625 - 10390 (1 90 - 112 (1 3000 / 4000 -40 to +40 >70 / >80 (2 Ø 560x450 60 - 76 |
Chromaticity tolerance (initial MacAdam):5 1-10V; DALI; Midnight dimming Surge protection: 6kV (L-N) and 10 kV (L/N -PE without DALI connection)(3 Radio frequency / Power line Warranty 5 years >70 000 h (L90B10) at Ta = 25 °C(4 |
RoHS IP66 IK08 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
SUNFLOWER Round
| V Hz W lm lm/W K oC CRI |
220 - 240 50 - 60 20 - 100 800 - 11000 Up to 100 3000 / 4000 +10 to +35 Ra >80 |
Chromaticity tolerance (initial MacAdam): 3 100 000 h (L80B50) at Ta = 25 °C |
RoHS IP20 |
Preliminary data. This value is only informative and may change according to selected article.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
SPARROW
| V Hz W lm lm/W K oC CRI |
220 - 240 50 14 - 22 Up to 2300 Up to 105 3000 / 4000 +10 to +35 >80/ >90 |
Chromaticity tolerance (initial MacAdam):3 |
RoHS IP20 |
Technical parameters for final product can differ from typical data by 10% due to special conditions of LED manufacturing processes.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
MUSTANG
| V Hz W lm lm/W K oC CRI mm |
220 - 240 50 - 60 700 (max) 34449 - 90540 102 - 141 3000 / 4000 / 5000 / 5700 -40 to +50 >70 / >80 (1 789 x 690 x 216 |
Chromaticity tolerance (initial MacAdam): 5 1-10V; DALI; Midnight dimming Surge protection: 6kV (L-N) and 10 kV (L/N -PE without DALI connection)(2 Radio frequency / Power line Warranty 5 years 100 000 h (L90B10C10) at Ta = 25 °C (3 |
KEMA KEUR RoHS IP66 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
PINE Connect
| V Hz W lm lm/W K oC CRI PF |
220 - 240 50 20 - 80 2000 - 8800 Up to 110 3000 / 4000 +10 to +35 Ra>80 >0.9 |
Chromaticity tolerance (initial MacAdam):3 DALI / Pull dimmer Body: Aluminium Cover type: Prismatic / Opal Mounting: Surface / Pendant Size: 564/846/1125/1407/1686/1968/2246 x 77 x 93 Warranty 5 years 50 000 h (L90B50) at Ta = 25 °C 100 000 h (L80B50) at Ta = 25 °C |
RoHS IP40 |
Technical parameters for final product can differ from typical data by 7% due to special conditions of LED manufacturing processes.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
OAK
| V Hz W lm lm/W K oC CRI mm |
220 - 240 50 - 60 38 - 90 Up to 12780 (1 Up to 14400 (2 147 - 142 (1 168 - 160 (2 3000 / 4000 +10 to +35 >80 1310 x 121 x 102 |
Chromaticity tolerance (initial MacAdam): 3 DALI / Non dimmable Mounting: Surface / Pendant Wiring & conncetion: One end connection Through wiring Halogen free wires Body material: Alu-zinc (to ensure anti-corrosion) Cover type: Clear 50 000 h (L90B50) at Ta = 25 °C 100 000 h (L80B50) at Ta = 25 °C Warranty 5 years |
RoHS IP23 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
3D STAR
| V Hz W oC mm |
220 - 240 50 - 60 55 -15 to +40 1032 x 1042 x 1032 |
Frame color: pure white/ warm white/ blue/ red/ amber/ green Fill color: pure white/ warm white/ blue/ red/ amber/ pink/ green Warranty 2 years |
IP44 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
2D STAR
| V Hz W oC mm |
220 - 240 50 - 60 22 -15 to +40 720 x 822 |
Frame color: pure white/blue Fill color: blue/pure white Warranty 2 years |
IP44 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
MORNING STAR
| V Hz W oC mm |
220 - 240 50 - 60 50 -15 to +40 1250 x 1250 |
Frame color: pure white/blue Warranty 2 years |
IP44 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
MINI MARTIN Flood
| V Hz W lm lm/W K oC CRI mm |
220 - 240 50 - 60 10 - 110 1100 - 13550 110 - 136 3000 / 4000 (1 -40 to +50 >70 / >80 (2 465.5 x 250 x 60 |
Chromaticity tolerance (initial MacAdam): 5 1-10V; DALI; Midnight dimming Surge protection: 6kV; 10 kV (3 Radio frequency (4 Warranty 3 years 100 000 h (L95B10C10) at Ta = 25 °C |
RoHS IP66 IK08 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
OWL High Bay
| V Hz W lm lm/W K °C CRI mm Ø |
220 - 240 50 - 60 85 - 340 11370 - 41190 116 - 138 3000 / 4000 / 5000 -40 to +50 >70 / >80 / Ra>90(1 533 x 655 x 85 40 - 60 |
Chromaticity tolerance (initial MacAdam):5 1-10V; DALI; Midnight dimming Surge protection: 3; 6; 10 kV (optional)(2 10 kV (L/N -PE without DALI connection)(3 Radio frequency / Power line Warranty 5 years >100 000 h (L95B10) at Ta = 25 °C |
RoHS IP66 IK08 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
WOODPECKER
| V Hz W lm lm/W K oC CRI |
220 - 240 50 - 60 15 - 28 1850 - 3380 121 - 123 3000 / 4000 (1 -40 to +50 >70 / >80 |
Chromaticity tolerance (initial MacAdam): 5 DALI / Midnight dimming 12 LEDs | 1 lens 24 LEDs | 2 lenses 175x92x40 348x92x40 Surge protection: 6kV (L-N) and 10 kV (L/N -PE without DALI connection) (2 Warranty 5 years 100 000 h (L90B10) at Ta = 25 °C (3 |
RoHS IP65 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
FALLING STAR
| V Hz W oC mm |
220 - 240 50 - 60 85 -15 to +40 1003 x 1031 |
Frame color: warm white Fill color: pure white (flashing) Tertiary color: pure white (flashing) Warranty 2 years |
IP44 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
ROUND STAR
| V Hz W oC Ø mm |
220 - 240 50 - 60 22 -15 to +40 1200 1260 x 1200 |
Frame color: warm white Fill color: pure white (flashing) Warranty 2 years |
IP44 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
SNOWBALL
| V Hz W oC Ø L / mm |
220 - 240 50 - 60 75 -15 to +40 636 3000 |
Frame color: warm white (flashing) Warranty 2 years |
IP44 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
SNOWFLAKE
| V Hz W oC mm |
220 - 240 50 - 60 200 -15 to +40 5600 x 1000 |
Frame color: warm white Fill color: white Tertiary color: blue Warranty 2 years |
IP44 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
SQUARE STAR
| V Hz W oC mm |
220 - 240 50 - 60 55 -15 to +40 1270 x 1270 |
Frame color: warm white Fill color: white Warranty 2 years |
IP44 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
WINTER STAR
| V Hz W oC mm |
220 - 240 50 - 60 65 -15 to +40 1368 x 1349 |
Frame color: warm white Fill color: pure white Warranty 2 years |
IP44 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
NEST Basic Round
| V Hz W lm lm/W K oC CRI mm |
220 - 240 50 8 - 25 940 - 2640 85 - 100 3000 / 4000 +10 to +35 Ra >80 Ø165 |
Chromaticity tolerance (initial MacAdam):3 DALI / Non dimmable Body maerial: Aluminium Cover type: Clear glass Warranty 3 - 5 years 50 000 h (L90B50) at Ta = 25 °C 100 000 h (L80B50) at Ta = 25 °C |
RoHS IP40 |
Technical parameters for final product can differ from typical data by 10% due to special conditions of LED manufacturing processes.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
NEST Basic Tiltable
| V Hz W lm lm/W K oC CRI mm |
220 - 240 50 8 - 12 775 - 1320 96 - 110 3000 / 4000 +10 to +35 Ra >80 Ø98 |
Chromaticity tolerance (initial MacAdam):3 Non-dim / DALI Distribution angle 24°/36°/60° Body maerial: Aluminium Cover type: Clear glass Warranty 3 - 5 years 50 000 h (L90B50) at Ta = 25 °C 100 000 h (L80B50) at Ta = 25 °C |
RoHS IP20 |
Technical parameters for final product can differ from typical data by 10% due to special conditions of LED manufacturing processes.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
ORRIS Basic
| V Hz W lm lm/W K oC CRI mm Ø |
220 - 240 50 - 60 5 - 75 470 - 8050 95 - 112 3000 / 4000 / 5000 -40 to +40 >70 / >80 (1 425x425x816 42 - 60 |
Chromaticity tolerance (initial MacAdam): 5 1-10V; DALI; Midnight dimming Surge protection: 6kV (L-N) and 10 kV (L/N -PE without DALI connection)(2 Radio frequency / Power line Warranty 5 years 100 000 h (L90B10) at Ta = 25 °C |
RoHS IK08 IP65 |
(1 Luminaries with color rendering index (CRI): Ra >90 on request
(2 10 kV ( L-N; L/N-PE ) surge protection device available on request
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
FERN
| V Hz W lm lm/W K oC CRI mm |
220 - 240 50 - 60 600 mm - 12 … 30 W 1200 mm - 19 … 60 W 1500 mm - 23 … 75 W Up to 9700 Up to 140 3000 / 4000 +10 to +40 Ra >80 600 / 1200 / 1500x148x49 |
Chromaticity tolerance (initial MacAdam): 3 DALI / Non dimmable Cover: Prismatic Mounting: Surface Body material: Alu-zinc Body color: White - RAL 9016 Warranty 5 years 50 000 h (L90B50) at Ta = 25 °C 100 000 h (L80B50) at Ta = 25 °C |
RoHS IP44 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
MICRO MARTIN
| V Hz W lm lm/W K oC CRI |
220 - 240 50 - 60 5 - 75 470 - 9130 90 - 132 3000 / 4000 -40 to +50 >70 / >80 (1 |
Chromaticity tolerance (initial MacAdam):5 1-10V; DALI; Midnight dimming Die-cast aluminum Surge protection: 6kV / seperate built-in 10 kV Console: ø 40 - 60 mm Dimensions: 517 x 170 x 98 mm Radio frequency Warranty 5 years 100 000 h (L95B10) at Ta = 25 °C |
IP66 IK08 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
BLACKBIRD
| V Hz W lm lm/W K oC CRI |
220 - 240 50 - 60 8 - 100 860 - 13300 107 - 135 3000 / 4000 -40 to +50 >70 / >80 (1 |
Chromaticity tolerance (initial MacAdam):5 DALI, Midnight dimming, 1-10V Power factor: up to 0,98 Die-cast aluminum Surge protection: 6kV / seperate built-in 10 kV Dimensions: ø380x296 Warranty 5 years 100 000 h (L95B10) at Ta = 25 °C |
IP66 IK09 |
* Preliminary and will change according to testing results.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
LUSCINIA Side-entry
| V Hz W* lm lm/W K oC CRI |
220 - 240 50 - 60 5 - 63 860 - 7930 107 - 135 3000/4000 -40 to +50 >70 / >80 (1 |
Chromaticity tolerance (initial MacAdam): 5 Die-cast aluminum Body color: Black - RAL9005 Console: Side-entry Dimensions: ø 340 x 100 DALI, Midnight dimming, 1-10V Radio frequency Surge protection: 6 kV / seperate built-in 10 kV 100 000 h (L95B10) at ta = 25°C Warranty 5 years |
IP66 IK09 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
LUSCINIA Post top
| V Hz W lm lm/W K oC CRI |
220 - 240 50 - 60 5 - 63 770 - 7650 114 - 139 3000 / 4000 -40 to +50 >70 / >80 (1 |
Chromaticity tolerance (initial MacAdam): 5 Die-cast aluminum Body color: Black - RAL9005 Dimensions: 343 x 570 DALI, Midnight dimming, 1-10V Radio frequency Surge protection: 6 kV / seperate built-in 10 kV 100 000 h (L95B10) at ta = 25°C Warranty 5 years |
IP66 IK10 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
STORK LITTLE BROTHER Flood
| V Hz W* lm lm/W K oC CRI mm |
220 - 240 50 - 60 5 - 170 2300 - 21300 121 - 137 3000 / 4000 -40 to +50 >70 / >80 (1 665 x 280 x 104 |
Chromaticity tolerance (initial MacAdam): 5 1-10V; DALI; Midnight dimming Surge protection: 6kV (L-N) and 10 kV (L/N -PE without DALI connection)(2 Radio frequency / Power line Warranty 5 years 100 000 h (L95B10C10) at Ta = 25 °C |
IP66 IK09 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
MICRO MARTIN Flood
| V Hz W* lm lm/W K oC CRI |
220 - 240 50 - 60 5 - 70 470 - 8600 90 - 132 3000 / 4000 -40 to +50 >70 / >80 (1 |
Chromaticity tolerance (initial MacAdam):5 1-10V; DALI; Midnight dimming Die-cast aluminum Surge protection: 6kV / seperate built-in 10 kV Radio frequency Warranty 5 years 100 000 h (L95B10) at Ta = 25 °C |
IP66 IK08 |
* Preliminary and will change according to testing results. Data may not be used for tenders or purchasing.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
MICRO MARTIN Smooth
| V Hz W* lm lm/W K oC CRI |
220 - 240 50 - 60 5 - 50 470 - 5295 90 - 132 3000 / 4000 -40 to +50 >70 / >80 (1 |
Chromaticity tolerance (initial MacAdam):5 1-10V; DALI; Midnight dimming Die-cast aluminum Surge protection: 6kV / seperate built-in 10 kV Console: ø 40 - 60 mm Dimensions: 517 x 170 x 98 mm Radio frequency Warranty 5 years 100 000 h (L95B10) at Ta = 25 °C |
IP66 IK08 |
* Preliminary and will change according to testing results. Data may not be used for tenders or purchasing.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
MINI MARTIN Tool-less
| V Hz W lm lm/W K oC CRI mm Ø |
220 - 240 50 - 60 10 - 110 1100 - 13550 110 - 136 3000 / 4000 / 5000 -40 to +50 >70 / >80 (1 520 x 220 x 109 40 - 60 |
Chromaticity tolerance (initial MacAdam):5 1-10V; DALI; Midnight dimming Surge protection: 6kV (L-N) and 10 kV (L/N -PE without DALI connection)(2 Radio frequency Warranty 5 years 100 000 h (L95B10C10) at Ta = 25 °C |
IP66 IK08(3 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
MINI MARTIN Smooth
| V Hz W lm lm/W K oC CRI mm Ø |
220 - 240 50 - 60 10 - 75 891 - 9800 89 - 136 3000 / 4000 / 5000 -40 to +50 >70 / >80 (1 520 x 220 x 109 40 - 60 |
Chromaticity tolerance (initial MacAdam):5 1-10V; DALI; Midnight dimming Surge protection: 6kV (L-N) and 10 kV (L/N -PE without DALI connection)(2 Radio frequency Warranty 5 years 100 000 h (L95B10C10) at Ta = 25 °C |
IP66 IK08(3 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
MICRO MARTIN Tool-less
| V Hz W lm lm/W K oC CRI |
220 - 240 50 - 60 5 - 75 470 - 9130 90 - 132 3000 / 4000 -40 to +50 >70 / >80 (1 |
Chromaticity tolerance (initial MacAdam):5 1-10V; DALI; Midnight dimming Die-cast aluminum Surge protection: 6kV / seperate built-in 10 kV Console: ø 40 - 60 mm Dimensions: 517 x 170 x 98 mm Radio frequency Warranty 5 years 100 000 h (L95B10) at Ta = 25 °C |
IP66 IK08 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
MICRO MARTIN Tool-less | Smooth
| V Hz W* lm lm/W K oC CRI |
220 - 240 50 - 60 5 - 50 470 - 5295 90 - 132 3000 / 4000 -40 to +50 >70 / >80 (1 |
Chromaticity tolerance (initial MacAdam):5 1-10V; DALI; Midnight dimming Die-cast aluminum Surge protection: 6kV / seperate built-in 10 kV Console: ø 40 - 60 mm Dimensions: 517 x 170 x 98 mm Radio frequency Warranty 5 years 100 000 h (L95B10) at Ta = 25 °C |
IP66 IK08 |
(1 Luminaires with color rendering index (CRI): Ra >90 on request
Technical parameters for final product can differ from typical data by 7% due to special conditions of LED manufacturing processes.
* Preliminary and will change according to testing results. Data may not be used for tenders or purchasing.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
MINI MARTIN Tool-less | Smooth
| V Hz W lm lm/W K oC CRI mm Ø |
220 - 240 50 - 60 10 - 75 891 - 9800 89 - 136 3000 / 4000 / 5000 -40 to +50 >70 / >80 (1 520 x 220 x 109 40 - 60 |
Chromaticity tolerance (initial MacAdam):5 1-10V; DALI; Midnight dimming Surge protection: 6kV (L-N) and 10 kV (L/N -PE without DALI connection)(2 Radio frequency Warranty 5 years 100 000 h (L95B10C10) at Ta = 25 °C |
IP66 IK08(3 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
BLACKBIRD hanging
| V Hz W lm lm/W K oC CRI |
220 - 240 50 - 60 8 - 100 860 - 13300 107 - 135 3000 / 4000 -40 to +50 >70 / >80 (1 |
Chromaticity tolerance (initial MacAdam): 5 DALI, Midnight dimming, 1-10V Power factor: up to 0,98 Die-cast aluminum Surge protection: 6kV / seperate built-in 10 kV Dimensions: ø380x268 Warranty 5 years 100 000 h (L95B10) at Ta = 25 °C |
IP66 IK09 |
* Preliminary and will change according to testing results.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
LUSCINIA Hanging
| V Hz W lm lm/W K oC CRI |
220 - 240 50 - 60 5 - 63 860 - 7930 107 - 135 3000/4000 -40 to +50 >70 / >80 (1 |
Chromaticity tolerance (initial MacAdam):5 Power factor: up to 0,97 Die-cast aluminum Body color: Black - RAL9005 / Asphalt - DB 703 Console: Hanging Dimensions: Hanging ø 340 x 80 DALI, Midnight dimming, 1-10V Radio frequency Surge protection: 6 kV / seperate built-in 10 kV 100 000 h (L95B10) at ta = 25°C Warranty 5 years |
IP66 IK09 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 22 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 24
STONE chemical
| V Hz W lm lm/W K CRI |
220 - 240 50 - 60 10 - 50 1300 - 6850 122 - 139 3000 / 4000 >80 |
Chromaticity tolerance (initial MacAdam): 3
DALI / Non dimmable Length 679/1289/1589 mm Body material: Glass fibre-reinforced polyester (GRP) Cover type: Pearl structure (PMMA) Gasketing: Non-ageing polyurethane foam Catches: Captive, highly resistant, articulated catches of stainless steel Warranty 5 years 50 000 h (L90B50) at Ta = 25 °C 100 000 h (L80B50) at Ta = 25 °C
Halogen free wires Ambient temperature -15 ... +35oC - non dimmable -25 ... +35oC - dimmable
-40 ... +35oC - freezers
0 ... +35oC - emergency
|
RoHS IP65 / IP67 IK02 |
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 45 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 45 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
About VIZULO
VIZULO stands for beautiful product design, high technical parameters, and excellent quality. We are an LED luminaire production and sales company specialising in territory, street, commercial, industrial and architectural LED lighting.
VIZULO is a technology driven lighting producer with a focus on smart city concept development. Research and development of high-quality products are the priority of the company and the VIZULO engineering team has been formed as a result of great cooperation with Riga Technical University – a number of researchers holding a doctoral degree are employed in the company. Since its establishment in 2012, the company has grown rapidly – there are 100 people working today in VIZULO group and our lighting products are exported to 34 countries all over the world.
Armenia, Austria, Croatia, Czech Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany, Great Britain, Greece, Hungary, Iceland, Ireland, Israel, Lithuania, Moldova, Morocco, New Zealand, Norway, Peru, Poland, Saudi Arabia, Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Thailand, The Netherlands, Ukraine, United Arab Emirates.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
Wire cutting
EcoStrip 9300 efficiently and precisely processes round cables and wires up to 6 mm (0.235") outer diameter and flat ribbon cables up to a width of 13 mm (0.511") with a stripping length up to 999.9 mm (3.28 ft)
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
Crimping
The UniCrimp 200 benchtop crimping machine is designed for crimping open or closed barrel terminals with up to 3.4 tons (33 kN) of crimp force. The machine easily handles wire sizes up to 6 mm² (10 AWG) and accepts most standard mini-style applicators (mechanical or pneumatic) for crimping side- and rear-feed terminals.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
Tampo printing
Tampoprint SC 60 E
Cycles/hour: up to 1,500
Print image size : max. 55 mm
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
Contacts
VIZULO SIA
Sales
Starta iela 1
Riga, LV-1026, Latvia
+371 67 383 023
Production
Laucu Lejas
Iecava, LV-3913, Latvia
+371 67 383 024
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
References
VIZULO is proud to show most remarkable and prestigious LED lighting projects in its region. Company has stable position in Baltic LED lighting market including different product groups: street, industrial, office, commercial, architectural lighting.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
Production
VIZULO has production facilities in Iecava, Latvia – a perfect place for delivering high-quality products while having a value for money pricing policy. The professional staff of the ESD zone department produce ready-made products at high speed, thus making deliveries of even large orders in a short time.
ELECTRONIC PRODUCTION LINE
VIZULO employs hi-tech automated electronic production lines – a high-speed surface mount technology line and selective soldering line. This gives great flexibility in specific LED module development and custom made production, as well as a possibility to produce any other electronics device – such as surge protection devices and different smart sensors.
METAL WORK DIVISION
A variety of metal working equipment has been installed in 2016 – a large size CNC mill, sheet metal punching machine, sheet metal folding machine and other machines for indoor and outdoor luminaire production.
HIGH-SPEED POWDER COATING LINE
A high speed 400 m2 large luminaire powder coating conveyor system is used to ensure an excellent quality coating process.
LUMINAIRE ASSEMBLY LINE
When the metal working and powder coating process is finished, mechanical parts arrive at the luminaire assembly line – where LED modules from the electronic production line are assembled with other parts. Thus the majority of the luminaire production process is performed in-house.
QUALITY AND TESTING
Photometric tests – light distribution, colourimetric testing and photobiological safety testing.
Quality tests of different types of coatings including powder coatings – neutral salt spray testing (NSST), Machu tests, measurement of thickness of coating layer.
IP class testing, IK class testing, temperature testing, vibration and shock testing, EMC testing is organised in cooperation with well-known and reputable certification bodies in Europe.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
Design and development services
Our engineers can help to develop different boards for your applications. After consultations about required PCB parameters, we will design the boards using CAD software. When the PCB design is finalized, we order the PCB prototype from reliable manufacturers and afterwards SMT components can be soldered in our SMT production line.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
Gasketing and coating
The PVA350 is a flexible robot for selective coating and automated dispensing application.
Min working area - 75mm x 75mm;
Max working area - 380mm x380 mm;
Materials: Silocone, urethane, acrylic, epoxy.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
Warranty
This document sets forth the warranty rules for LED outdoor lighting products (“Products”) sold by SIA VIZULO SOLUTIONS (LLC) (“VIZULO”). Unless otherwise stipulated in the purchase agreement, the warranty for Products is only applicable to the party purchasing the Products (“Purchaser”) directly from VIZULO or authorised VIZULO distributer or dealer. This is a standard warranty by default applicable to the Purchaser. On request a customized warranty can be agreed after evaluation of the specific application conditions. VIZULO warrants that Products, when delivered in new condition and in its original packaging, will be free of defects for a period stated below if rules set in this warranty have been respected.
1.WARRANTY PERIOD
The foregoing warranty shall be valid for the period mentioned below:
2.WARRANTY CONDITIONS
2.1. VIZULO warranty is valid only if Products are properly handled, stored, wired, transported, installed and used in accordance with the installation and operating instructions and the operating conditions of Products are in accordance with the environmental conditions provided in the specification, information on the Products, IEC standards, packaging or any document attached to the Product, and taking into account the specific tolerances on flux and system power, as mentioned in the Product’s technical specification.
2.2. The working environment and conditions of Products should qualify with the relevant technical specification where exact temperature and voltage range, IP class, IK class and electrical safety class is defined. The values of temperatures and voltages mentioned in Product’s technical specification must not be exceeded.
2.3. This warranty covers Product failures caused by material, design or production faults.
2.4. Purchase receipt for the Product has to be available for inspection by VIZULO.
2.5. If VIZULO determines to its satisfaction that this warranty applies to the Product, VIZULO will, at its option, repair or replace the Product or the defective part thereof, or reimburse Purchaser for the purchase price, subject to the terms and conditions set forth herein.
2.6. If VIZULO chooses to replace the Product and is not able to do so because it has been discontinued or is not available, VIZULO may replace it with a comparable product (that may make small deviations in designs and Product specification). VIZULO reserves the right to use new, reconditioned, refurbished, repaired or remanufactured products or parts in the repair or replacement of any Product covered by this warranty.
2.7. A Product shall not be considered defective solely as a result of the failure of individual LED components to emit light if the number of inoperable components is less than 10% of the total number of LED components in the Product.
2.8. The determination of whether the Products are defective shall be made by VIZULO in its sole discretion with consideration given to the overall performance of the Products.
2.9. Products shall be purchased directly from VIZULO, an authorised VIZULO distributer or dealer.
2.10. Third party products sold by VIZULO are not covered under this warranty.
3. SPECIAL CONDITIONS
3.1. Warranty period starts on the date of VIZULO invoice unless it is otherwise stipulated in the Products purchase agreement.
3.2. The power of the luminaries has to be measured 1-2 hours after the lights have been switched on.
3.3. VIZULO shall have access to the failed Products and to the fixtures used to operate Products. VIZULO reserves the right to visit the site and carry out necessary measurements. If the fixture or other parts become suspect, VIZULO shall have the right to evaluate the lighting system components and application.
3.4. The warranty is only valid if the minimum and maximum ambient temperature that is specified in the technical specification of the Product is respected.
3.5. The warranty for outdoor Products is only valid for maximum one switching per day.
3.6. This warranty does not apply and VIZULO will not change any components or will not repair the Products because of stains, scratches, grooves, colouration defects.
3.7. A new warranty period will not start in case of repair or replacement of the Product after approved claim.
3.8. The warranty period is based on a burning behaviour of max 4000 hours/year and the warranty applies when the lumen depreciation is below 80% of the original lumen output installed.
3.9. Dimming and application of network control systems have no influence on the warranty period.
4. THIS WARRANTY DOES NOT EXTEND WHEN:
4.1. The Product has been repaired, modified or transformed by any person or company other than VIZULO.
4.2. Defects or damages have occurred because of incorrect or inappropriate storage, installation or maintenance, including inappropriate external environmental factors or in case of abnormal use or use in violation of any applicable standard, code or instruction for use including but not limited to those contained in the latest safety, industry and electrical standards for the region.
4.3. Defects or damages have occurred because of the incorrect supply voltage, including over-voltages and any other problems in the power supply system.
4.4. Defect or damage was caused by physical interference, vandalism, military operations, disturbances or unrest, terrorism, natural disasters, by a car crush or any other Acts of God.
4.5. Defect or damage was caused by any ancillary installations or accessories that are not supported or recommended by the VIZULO.
4.6. The labels or serial numbers of the Product or any part thereof have been altered, obscured or otherwise not readable.
4.7. Defects have occurred as a result of the normal depreciation of use.
4.8. The defect is caused by improper service of the Product performed by someone other than VIZULO or its authorized service provider.
4.9. The Purchaser or any unauthorised person has changed the driver settings of the Product.
5. Warranty claims
5.1. Warranty claims (using the warranty claim form available on www.vizulo.com and attaching the copy of VIZULO invoice and CMR) have to be reported to VIZULO within 30 days after discovery (unless otherwise specified in the purchase agreement) specifying at least the following information (additional info may be required on request): details about the failed Product; installation date and invoice date; detailed problem description; date of failure; application, hours burned and switching cycles. VIZULO may require Purchaser to return the Product to VIZULO fright prepaid.
5.2. Warranty claims shall be addressed to SIA "VIZULO Solutions", “Laucu lejas”, Iecava, Iecavas novads, Latvia, LV-3913.
6.SUMMARY
6.1. VIZULO warranty rules apply only to Products that have been used in accordance with the purpose of its use and installation and operating instructions.
6.2. The Purchaser has to collect and save all the documentation related to the Product and records of operating history (i.e. previously recognised defects, performed repair works). The Purchaser will have to show this documentation to VIZULO if necessary.
6.3. The costs of the Product demounting, remounting, labour-costs and transportation in order to receive and return items are the responsibility of the Purchaser and are not covered under this warranty.
6.4. In the case of the Product failure, VIZULO quality department will analyse damaged Product samples and on its own insight might decide to repair defective Products or supply adequate Products as a replacement or compensate Products to the Purchaser.
6.5. No agent, distributor or dealer is authorized to change, modify or extend the terms of this warranty on behalf of VIZULO.
6.6. In no event shall VIZULO be liable for special, incidental, consequential, indirect or compensatory damages, including, without limitation, damages resulting from loss of use, profits, business or goodwill even if VIZULO was advised of or was otherwise aware of the possibility of such damages.
6.7. VIZULO has all the rights to acquire the non-conforming or defective Products as soon as they have been replaced.
6.8. This is a limited warranty and excludes, among other items, installation, providing access to products (scaffolding, lift etc.), and special, incidental and consequential damages (such as loss of profits/revenues, damage to property or other miscellaneous costs not previously mentioned). This limited warranty only applies to lighting fixtures specified in article 1 (“WARRANTY PERIOD”). Smart street light controls/sensors and other accessories are not covered under this warranty.
6.9. VIZULO reserves the right to modify this warranty from time to time and any modifications shall be effective for all orders placed on or after the effective date of such revised warranty.
6.10. This warranty states VIZULO’s entire liability and obligations towards Purchaser and Purchaser’s sole and exclusive remedy in connection with defective or non-conforming Products, whether or not such damages are based on any warranty not explicitly mentioned in these warranty rules, tort, contract or any other legal form, even if VIZULO has been advised or is aware of such defect.
6.11. Purchaser shall not rely upon any other documentation or information regarding warranty terms of the Products except this VIZULO Product warranty.
7. Effective Date: 2016, June 17.
WARRANTY CASE PROCEDURE
1) Fill in VIZULO claim report, sign it and scan it; download Product Warranty Claim
2) Make a copy of VIZULO invoice and CMR;
3) Send all documents to e-mail of respective sales agent;
Respective sales agent or VIZULO sales administrator will contact you about receiving faulty goods. VIZULO quality control team will analyse this claim and in the case of guarantee will replace or repair the faulty goods.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
Assembly - Box build
PCB mounting into housings (mechanics and cable connections), software loading and system tests (may be performed on the customers requests), packaging, documentation and delivery using established logistics processes worldwide.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
SMT line
Solder paste printing
Speedprint 710
Max board size - 610mm(x) by 508mm(y)
Min board size - 45mm x 45mm
Maximum PCB weight - 1Kg (2.2lb)
Max print area - 610mm(x) x 508mm(y)
Max PCB thickness - Up to 8mm (0.2”) including 1% warpage
Different Frame sizes for stencils
ZelFlex 29"x 25" (736mm x 636mm) with printing area 24,3" x 21,1" (616mm x 536mm)
ZelFlex 29"x 29" (736mm x 736mm) with printing area 24,3" x 24,3" (616mm x 616mm)
Pick and Place machine
MYDATA MY100DXe-14
Min Board size - 70x50mm
Max Board size - 736x609mm
Speed = 32000CPH
Possible mounting - Chip (from 0201), S028, S0T223, S0J20, PLCC32, MELF, S0D, TSOP, BGA, Flip chip, Odd-Shape, Surface-mount connectors, DPAK, Tantalum.
Largest component dimensions: 56 x 56 x 15 mm, height of the components with individual adaptation: up to 20 mm
Reflow owen
SMT Quattro Peak M N2 with nitrogen option (length: 3048mm / 5 heating zones)
Max board dimension 600mm x 508mm
Different conveyors to make all operations automatic
Conveyors consisting of in-line conveyor with solder printing and pick and place machine, workstation and board unloader.
Conveyors:
Min board dimension 70mm x 50mm
Max board dimension 600mm x 508mm
Magazines types for loaders with board max dimension sizes
1. 600mm x 510mm
2. 510mm x 300mm
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
Street & highways
Innovative approach in street and highway lighting is using LED for their low energy cost and brighter light output. LED lamps overpowers any other luminaire while having the same results for total lumens. When it comes to night time as new and new researches show that the scotopic (night vision for humans) lumens are twice as more for LED and the difference can be easily
noticed with a naked eye. In short – human eye sensitivity changes during night time and yellow light seems dimmer than white bluish LED light. They outcome other luminaires:
- longer service life
- low energy costs
- emitting only in visible range
- no harmful materials are used in making of them
- colour rendering is excellent
- resistant to vibrations and physical impact
- taking less space
- dimming can be made with high precision with no colour change
Use of LED luminaires with cool tone provides easier eye adaption when it comes to dusk and night time resulting of less stress for eyes and less chance of glaring.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
Education
When it comes to educational purposes, higher ergonomic consistency takes place. Starting with cover material to achieve prime visual demands such as illuminance and glare at flat and steep angles. With proper LED luminaire placement, e.g., proper table and blackboard illumination, emitted light resembling daylight enhances cognitive performance as well stabilises the inner biological
clock and overall sense of well-being, improving people’s concentration and performance. Stimulating the overall well-being with balanced out direct/indirect luminaires improves communication and teamwork. Flexible use of rooms and seating position is an achieved requirement when there is new teaching methods and media technology usage combined with frequent light adjustment. This is a key point in making the best out of study process. LED management gives an opportunity in high energy efficiency taking into account that frequent switching and dimming does not affect the service life of LED’s.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
Industry
Lighting in industry can be characterised with requirements for energy saving, empowerment (increasing performance) and maintenance factors. Sometimes up to 24 working hours with reduced daylight results in need for highly efficient technologies. Investing in LED lighting will pay for itself on a very short time-scale thanks to low energy costs and extensive use of daylight alike
lighting with reduced actual daylight perfectly complies with flexibility in production facilities. Not forgetting cleanliness and security where low maintenance, i.e., small sized and easy to clean luminaires comes in. Covering materials are chosen to be resistant not only to cleaning reagents but also dust or gases produced in making the products. Special degrees of ingress protection (IP) will be adjusted for each type of industry: shock-hazard and protection against outer unfamiliar solid ingress; water flowing in the luminaire and also fire protection.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
Retail
Along with increasing energy efficiency awareness more dimmable luminaries are used in retail. Skilful placement of lights can be described as having high level of comfort and flexibility while having low maintenance effort. Lighting direction, different luminance degrees and colour brightness to set the scene and stimulate possible customers. Moreover according luminaire direction (diffuse,
direct) – excellent colour rendering can be achieved along to accent goods, present them in greater detail and authenticate with a three dimensional effect – interchanging diffuse and directed light. Use of LED technology provides sustainability – replacing the luminaires with higher efficiency, lighting quality; comparing operating and input costs. Going along with nature – LED lighting provides high colour rendering that means more natural colours of goods while being basically free from hazardous IR and UV radiation. Both combined gives a gentle illumination of newest products that results in boosting the sales.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
Facade & architecture
Nowadays more and more facades are illuminated to enhance, accent the appearance of the building during night time. The biggest problem – costs – is solved with LED lighting for their durability, high efficiency and low energy costs. Good choice is to promote a corporation building or any accommodation availability that has influence on tourist visit and staying longer. LED
luminaires with a help of different optics can be directed to avoid stray light. Merging it with intelligent lighting management keeps balance of building illumination and environmental aspects, preventing environment, nature disturbance. To sum up we take three aspects – enhancing the building to keep its appearance at every hour of the day, adjusting proper light colour and paying attention to architectural details; human perception – draw attention with creative brighter lights during evening and morning hours; responsibility towards light pollution – stray light reduction, using at certain day hours, not disturbing people interaction with the facade.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
Health
Having luminaires with long service time while switched on most of the time or specific clean room lighting is a key point to have a suitable health establishment. Careful glare limitation planning and daylight compensation with best colour rendering artificial lighting provides stability of inner biological clock as most of the time is spent indoors. Times involving resting and sleeping must be
assisted with biologically potent manmade lighting with high intensity levels or this time large bluish component accordingly to the certain daytime. Emotional state of patients must be preserved so age appropriate bedside lighting, emergency lighting, hallway lighting (using indirect luminaires) is LED priority as to enhance comfort and increase efficiency. Specific lighting with higher illuminance level is needed for e.g. stimulation during night shifts and operation rooms where high precision lighting, while not occupying a lot of space, requires easy maintenance and is fit for sterile room standards. Eyes lose their acuity with age and for more subtle visual tasks artificial light compensates the loss with highly effective bluish components filtered out.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
Office
Considering the time spent in the office lighting first of all sets the mood in the room and is therefore dependent on how it is adjusted to the workplace and how the avoiding the glare is taken care of. Achieving those needs makes working easier and improves the people’s performance, also well-being when chance of making errors, loosing concentration and getting exhausted is
decreased. While favouring daylight as chosen source of light it can still be enriched with artificial light at corresponding times of day to strengthen people and their body activity. Respecting the demographic tendency and also higher lighting levels for older co-workers preserves personality of each employee. Lighting management is perfected with LEDs – easily integrated into the system, investing now pays back later during the long service life, low maintenance trouble, reduced energy consumption and being unharmed by the frequent switching and dimming. Changing the lighting in different work areas while doing it with maximum energy savings using LEDs and trying designing lighting into the architecture creates the identity of the building and increase its value.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
Hotel & Wellness
First appearance always is valued and using luminaires to enhance the building’s appearance gives a choice to reflect the concept of the institution. It can be done either with highlighting architectural elements, either decorating the façade and indoors. Every lighting action should be considered taking into account national and regional regulations and also using LED sustainability. The
visitor’s needs are the top priority and as they come to rest intuitive lighting design will become the key point in making the best of their stay, leaving satisfied with empowered feeling. In lighting management more can be achieved with LED’s insusceptibility to dimming and frequent switching in order to make gentle and dynamic changes in light tones. Gradual light change or predefined lighting scenes involving specific pools of light and dark areas when moving from, e.g. hallway to spa room, gives certain feeling of security and lowering the chances of anxiety due to minor dazzle. Indirect or distributed illumination, glare limitation also at steep angles reduces the chance of such unwanted situation.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
Art & Culture
Not only people, but also paintings/artwork require proper and adjusted lighting. Those more sensitive to light receive different level of illumination or different colour of light (lower LED colour temperature lowers the pressure on the exhibits). In art lighting is a necessity to present the artwork to its full potential, using diffuse lighting, accenting the light to raise the level of excitement and also
directingthe viewer’s attention. LED spotlights with proper dimming and optics, LED luminaires with reduced IR and UV radiation. Not mentioning only artwork, the appearance of the room, the architecture can be enhanced with directed or diffused luminaires thinking of environment and so utilising the daylight if possible to optimum result.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
Certificates and Awards
LIAA 2015 & LIAA 2016
The Investment and Development Agency of Latvia (LIAA) and the Ministry of Economics organise the annual Export and Innovation Award, celebrating the leading exporters and most innovative companies in Latvia.
Innovative product 2015 – 2nd place.
Industrial design 2016 – 3rd place.
Swedish business awards
Nomination - New entrepreneur
The project aims to provide positive examples for international establishments and business development by highlighting the success of cooperation, emphasising innovativeness, outstanding business achievements and the importance of contributions to society.
RED JACKETS
The Rising Stars 2015 Export Excellence Award Winner, Title winners or brands with export potential.
The Red Jackets goal is to create the strongest export brand and identify what the Latvian export image currently is.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
Lighting services
· a) developing client orientated products;
· b) delivering light planning calculations;
· c) assembling LED lighting products;
· d) organizing wholesales and end sales to large scale municipal and commercial clients;
· e) taking care of electrical installation – as general contractor (in special cases);
· f) monitoring electrical consumption and CO2 reduction for our major projects;
· g) taking care of warranty period;
· h) selling components after warranty period.
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
Production
VIZULO has production facilities in Riga, Latvia – perfect place for delivering high quality products while having value for money pricing policy. Professional staff of ESD zone department ready made products in high speed thus making deliveries of even large orders in decent timing.
Electronics production
Mechanical component production and coating
.jpg)
Luminaire production
Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 49 Notice: Undefined offset: 2 in /www/www.vizulo.eu/www/mekletajs.php on line 51
Sales Terms and Conditions
The basis for delivery of Products is the Agreement concluded between VIZULO and the Purchaser. These Terms and Conditions are an integral part of the Agreement.
Issued: 03.08.2016.
VIZULO LED LIGHTING SALES TERMS AND CONDITIONS
Download Customer Registration Form
Download Customer Product Order Form
1.DEFINITIONS
1.1 Agreement – a purchase or distribution agreement concluded between VIZULO and Purchaser and its annexes.
1.2 Customer Registration Form – form filled by Purchaser in order to provide relevant basic information about Purchaser.
1.3 Intellectual Property - any patent, copyright, registered design, trade mark or other industrial or intellectual property right in respect of the Products, and applications for any of the foregoing.
1.4 Parties – VIZULO and Purchaser together.
1.5 Product or Products - LED outdoor and indoor luminaries produced by SIA “VIZULO”.
1.6 Product Order Form - form, which according to the Agreement is used by the Purchaser to order the Products.
1.7 Product Quote - form which according to the Agreement is used by VIZULO to set the price payable and conditions applied for the delivery of Products.
1.8 Purchaser - purchaser or distributer of the Products that have signed the Agreement with VIZULO.
1.9 Terms and Conditions - these VIZULO Terms and Conditions.
1.10 VIZULO - SIA “VIZULO Solutions”.
2. GENERAL FRAMEWORK
2.1 The basis for delivery of Products is the Agreement concluded between VIZULO and the Purchaser.
2.2 These Terms and Conditions are an integral part of the Agreement.
2.3 VIZULO guarantees that Products have been manufactured in accordance with standards of the European Union and comply with the requirements laid down in laws and regulations of Latvia.
2.4 Any of the Purchaser’s terms and conditions that are different from or in addition to these Terms and Conditions shall have no effect unless specifically agreed by VIZULO in writing.
2.5 Purchaser has to fill and send to VIZULO Customer Registration Form before starting Product price request and Product orders.
3. PROCEDURE OF ORDERING PRODUCTS
3.1 VIZULO is providing Product Quote in e-mail to Purchaser - stating product prices, delivery terms, payment method and other relevant information on return Purchaser send Product Order Form before each order. In case of differences between Product Quote and Product Order form, information in Product Quote is dominant.
3.2 For each category of Products sold, the Parties to the transaction shall complete and execute a Quote, which establishes the particular terms and conditions governing the purchase of the specific Products.
3.3 Once accepted in e-mail by the Parties, the Product Order Form shall be incorporated in the Agreement.
3.4 The Product shall remain the property of VIZULO and VIZULO reserves title to the Products of the delivered order until receiving of all payments by the Purchaser and until all claims which are due to VIZULO arising from the current business relationship with the Purchaser have been fulfilled. The Purchaser shall at the request of VIZULO assist him in taking any measures necessary to protect VIZULO’s title to the Product. If retention of title is not valid according to the laws of the location place of the Products, the security corresponding to the retention of title in this jurisdiction is considered agreed. If necessary, upon VIZULO’s request, the Purchaser is obliged to take all measures which are needed for the establishment and retention of such rights, insofar as is deemed reasonable.
3.5 Purchaser shall not assimilate, transfer or pledge any of the Products, or grant any right or title to the Products to any third party until title to the Products has passed to Purchaser (except if such right or title is granted in the normal course of business). Purchaser shall ensure that the Products remain identifiable as VIZULOs’ Products.
3.6 An order is considered to be made and accepted at the moment when:
3.6.1 the Agreement is signed and Product Order Form is accepted in e-mail by the Parties; and
3.6.2 letter of credit has been received by VIZULO’s bank (if the letter of credit has to be provided according to Agreement or Product Quote)or;
3.6.3 the advance payment is received in VIZULO’s bank account (if the advance payment has to be paid according to Agreement or Product Quote) or.
3.6.4 VIZULO has received credit insurance approval of Purchasers orders from insurance company stating insurance limit and limit fully covers all unpaid Purchaser order sum (if the credit insurance has to be done according to the Agreement or Product Quote).
3.7 If so requested in the, Product Quote or Agreement and the letter of credit has not been forwarded to VIZULO’s bank within 10 (ten) days when the Parties have accepted in e-mail the Product Order Form or if the advance payment has not been received in VIZULOs bank account within 10 (ten) days when the Parties have accepted in e-mail the Product Order Form, VIZULO shall be entitled without prejudice to any of its rights in law, to cancel the order in full, without any liability to the Purchaser.
4. PRICE AND PAYMENTS
4.1 The currency for purchase prices is EURO.
4.2 All prices are shown on basis of Ex Works, excluding Value Added Tax and other amounts levied by official authorities and do not include carriage, insurance, storage, import or export duties or any other additional (handling) costs.
4.3 The purchase price is paid by the Purchaser at the moment when VIZULO has received the Purchase price in VIZULOs’ bank account set in the Product Quote. Provision of a letter of credit shall not constitute payment. Unless otherwise stated in the Product Quote the invoices are to be paid within 10 (ten) days from the invoice day.
4.4 Without prejudice to its other rights in respect thereof VIZULO shall be entitled to withhold further supplies while payment of any sums due from the Purchaser remains outstanding.
4.5 If the Purchaser does not pay the purchase price in accordance with Terms and Conditions or the Agreement, VIZULO shall be entitled to liquidate damages from the date on which the purchase price should have been paid by the Purchaser. Liquidated damages shall be payable by the Purchaser at a rate of 0.1 (zero point one) per cent of the agreed and unpaid purchase price for each commenced day of delay.
4.6 The payment of the penalty does not release the Parties from due performance of their obligations under the Agreement.
4.7 If VIZULO has to hire a debt collection company in order to collect the Purchaser’s debt, the Purchaser is obliged to cover all reasonable losses that occurred according to financial documents to VIZULO from the collection of debt from the Purchaser. VIZULO sends a written notice prior to the Purchaser in such an event.
4.8 The Parties, by accepting the Product Order Form in e-mail, may agree on other payment and delivery conditions.
4.9 If Purchaser does not comply with the Agreement and these Terms and Conditions and does not fulfil its payment obligations, or makes any other actions that may give a reason to think that the Purchaser will not be able to fulfil any or part of its payment obligations, at VIZULOS’ prior request Purchaser is obliged to return to VIZULO the Products in which the title has not yet passed to the Purchaser at Purchaser’s own cost. Purchaser agrees to fully cooperate with VIZULO in order for VIZULO or its representatives to collect its Products.
4.10 VIZULO holds rights to insure the debt of the Purchaser. After evaluation of Purchaser’s credit-worthiness and taking into account credit limit for which insurance company by VIZULO’s choice insures Purchaser, VIZULO allocates to the Purchaser credit limit and sets payment terms. VIZULO reserves the right to change the credit limit. If a new order of the Products submitted by the Purchaser exceeds the credit limit or for any reason it is not possible to insure the debt of the Purchaser, the Purchaser shall pay the uninsured purchase price to VIZULO for the order to be executed as follows:
(i) by providing VIZULO with the irrevocable letter of credit which is subject to approval of VIZULO. The costs of letter of credit shall be borne by Purchaser. VIZULO accepts letters of credit issued by the banks with the long-term credit rating in force at least in the level “A-“ (if issued by "Standard & Poor's rating Services" or “"Fitch Ratings”) or at least in the level A3 (if issued by the "Moody's Investor Services”); or
(ii) Within 5 (five) days after the Parties have accepted in e-mail the Product Order Form Purchaser shall pay advance payment 50% (fifty percent) of the current order purchase price. Remaining 50 % (fifty percent) shall be paid by the Purchaser till the delivery date. If the letter of credit has not been forwarded to the VIZULO’s bank or if the payment has not been received in VIZULO’s bank account within the agreed time, VIZULO has the right to extend the delivery term by the same number of days as the letter of credit or payment is received late.
4.11 If the letter of credit has not been forwarded to the VIZULO’s bank or if the advance payment has not been received in VIUZLO’S bank account within 10 (ten) days when the Parties have accepted in e-mail the Product Order Form or if the remaining payment is delayed for more then 10 (ten) days, VIZULO shall be entitled without prejudice to any of its rights in law, to cancel the order in full, without any liability to the Purchaser.
4.12 The Purchaser must report invoiced overages or Product shortages within 30 (thirty) days of invoice date. Any discrepancy not reported within 30 (thirty) days will not be considered for an adjustment.
5. DELIVERY TERMS
5.1 To the delivery of the Products International Chamber of Commerce (ICC) INCOTERMS 2010 EXW (Ex Works) applies - the Products are ready for collection at warehouse of VIZULO located at Starta iela 1, Riga, LV-1026, Latvia or "Laucu Lejas", Iecavas novads, LV-3913, Latvia, unless otherwise agreed by Parties in writing.
5.2 VIZULO undertakes to deliver Products suitably wrapped and packaged for their specific characteristics and for the conditions of transport to be used.
5.3 Delivery dates set by VIZULO are approximate only, however VIZULO will use commercially reasonable efforts to meet the delivery dates communicated or acknowledged by it on the condition that Purchaser has properly filled out the Product Order Form and provided all necessary information sufficiently prior to the delivery date. For any delivery made within a reasonable time before or after the previously set delivery date VIZULO shall not be liable for, nor shall VIZULO be in breach of its obligations to the Purchaser.
5.4 If Products are not delivered by VIZULO, Purchaser shall give VIZULO a written notice of failure to deliver the Products by which giving 30 (thirty) day’s period within which to deliver ordered Products. If VIZULO does not deliver within such period, Purchaser's sole and exclusive remedy is to cancel the affected and undelivered portions of the related Agreement.
5.5 Free access to the location where Purchaser is storing the Products in which the title has not yet passed to the Purchaser shall at all times be granted to VIZULO or its representatives by the Purchaser.
5.6 VIZULO have the rights to allocate its available Products, in its sole discretion, among its various customers in the event VIZULOs’ production is curtailed for any reason. As a result VIZULO may sell and deliver to Purchaser fewer Products than specified in the Agreement or Product Order Form without being responsible or liable to Purchaser for any damage resulting therefrom.
5.7 If the Purchaser anticipates that he will be unable to accept delivery of the Product at the time for delivery, the Purchaser shall forthwith notify VIZULO in writing at least 1 (one) week beforehand, thereof, stating the reason and, the time when he will be able to accept delivery. If the Purchaser fails to accept delivery at the time of delivery, the Purchaser shall nevertheless pay any part of the Purchase price which becomes due at the time of delivery, as if delivery had taken place at the time for delivery. VIZULO shall arrange storage of the Products at the risk and expense of the Purchaser. VIZULO shall also, if the Purchaser so requires, insure the Products at the Purchaser’s expense.
5.8 Unless the Purchaser’s failure to accept delivery is due to any such circumstance as mentioned in Force majeure clause, VIZULO may by notice in writing require the Purchaser to accept delivery within a final reasonable period.
5.9 In case of unjustified refusal on behalf of the Purchaser to take delivery, the costs incurred as a result of the delay shall be invoiced to the Purchaser 20 days after notification of the readiness for shipment and/or readiness for delivery-taking onwards.
5.10 If the Parties have agreed that VIZULO provides delivery to the delivery site required by the Purchaser:
5.10.1 the Purchaser shall bear all costs which arise through this service;
5.10.2 VIZULO does not bear liability if the Products of the order cannot be shipped due to liability of any party other than VIZULO (e.g. logistics, customs, transportation companies, brokers etc.);
5.10.3 delivery can be effectuated in partial shipments to the extent this is deemed acceptable by the Purchaser or VIZULO is rendered by any means unable to deliver the order complete and has notified the Purchaser as soon as the inability to deliver the order complete is ascertained.
5.11 If, for any reason which is not attributable to VIZULO, the Purchaser fails to accept delivery according to Agreement, VIZULO may by notice in writing terminate the Agreement and VIZULO shall then be entitled to compensation for the loss he suffers by reason of the Purchaser’s default, including any consequential and indirect loss.
5.12 The VIZULO’s contact person shall inform the Purchaser’s contact person by e-mail about the possibility to receive the Products.
5.13 The Products are considered delivered to the Purchaser on the date when the transport documents have been signed.
5.14 Products that have been delivered in accordance with the Agreement shall be deemed accepted by the Purchaser and the Purchaser shall have no right to revoke any acceptance, unless written notice of the claimed nonconformity is received by VIZULO within 30 (thirty) days of delivery. Notwithstanding the foregoing, any use Products by Purchaser, its agents, employees, contractors or licensees, for any purpose, after delivery thereof, shall constitute acceptance of these Products by the Purchaser. In case of defective Products they shall be deemed accepted by the Purchaser if the Purchaser will not react in period set in VIZULO warranty rule.
6. FORCE MAJEURE
6.1 Either Party shall be entitled to suspend performance of his obligations under the Agreement to the extent that such performance is impeded or made unreasonably onerous by Force Majeure, meaning any of the following circumstances: any circumstance beyond the control of the parties such as fire, war, extensive military mobilization, insurrection, requisition, seizure, embargo, restrictions in the use of power, currency and export restrictions, epidemics, natural disasters, extreme natural events, terrorist acts and defects or delays in deliveries by sub-contractors caused by any such circumstance referred to in this clause. A circumstance referred to in this clause whether occurring prior to or after the formation of the Agreement shall give a right to suspension only if its effect on the performance of the Agreement could not be foreseen at the time of the formation of the Agreement.
6.2 The Party claiming to be affected by Force Majeure shall notify the other Party in writing within three days on the intervention and on the cessation of such circumstance. If a Party fails to give such notice, the other Party shall be entitled to compensation for any additional costs which have incurred and which could have been avoided if such notice had been received. If Force Majeure prevents the Purchaser from fulfilling his obligations, the Purchaser shall compensate VIZULO for expenses incurred in securing and protecting the Product.
6.3 If the hindrance lasts longer than 3 (three) months, each Party is entitled to withdraw from the Agreement.
7. CONFIDENTIALITY
7.1 Purchaser shall use reasonable efforts to prevent disclosure to any third person of (i) any of the specific terms and conditions of Agreement, or (ii) any other information relating to the business or operations of the other Party that is not public knowledge (Confidential Information).
7.2 Purchaser is obliged to treat the Confidential Information received from VIZULO strictly confidential (unless otherwise agreed in writing), with the exception of information, which:
7.2.1 is already known to the Purchaser prior to disclosure, as evidenced by written documentation in the records of the Purchaser;
7.2.2 is in the public domain at the time of disclosure to the Purchaser or after such disclosure becomes part of the public domain through no fault of the Purchaser;
7.2.3 is lawfully disclosed on a non-confidential basis to the Purchaser by a third party.
7.3 The Confidential Information will be protected by the Purchaser with the same reasonable care that the Purchaser uses with respect to its own proprietary information. In particular, the Confidential Information will not be disclosed by the Purchaser to any third party, provided, however, that the Confidential Information may be made available by the Purchaser to those parent undertakings and subsidiary undertakings, advisors and employees who need to know such Confidential Information in order to